Header logo is


2011


no image
Potential explanation of charge response of magnetization in nanoporous systems

Subkow, S., Fähnle, M.

{Physical Review B}, 84, 2011 (article)

mms

DOI [BibTex]

2011


DOI [BibTex]


no image
Modeling of stochastic motion of bacteria propelled spherical microbeads

Arabagi, V., Behkam, B., Cheung, E., Sitti, M.

Journal of Applied Physics, 109(11):114702, AIP, 2011 (article)

pi

Project Page [BibTex]

Project Page [BibTex]


no image
The effect of aspect ratio on adhesion and stiffness for soft elastic fibres

Aksak, B., Hui, C., Sitti, M.

Journal of The Royal Society Interface, 8(61):1166-1175, The Royal Society, 2011 (article)

pi

Project Page [BibTex]

Project Page [BibTex]


Modelling pipeline for subject-specific arterial blood flow—A review
Modelling pipeline for subject-specific arterial blood flow—A review

Igor Sazonov, Si Yong Yeo, Rhodri Bevan, Xianghua Xie, Raoul van Loon, Perumal Nithiarasu

International Journal for Numerical Methods in Biomedical Engineering, 27(12):1868–1910, 2011 (article)

Abstract
In this paper, a robust and semi-automatic modelling pipeline for blood flow through subject-specific arterial geometries is presented. The framework developed consists of image segmentation, domain discretization (meshing) and fluid dynamics. All the three subtopics of the pipeline are explained using an example of flow through a severely stenosed human carotid artery. In the Introduction, the state-of-the-art of both image segmentation and meshing is presented in some detail, and wherever possible the advantages and disadvantages of the existing methods are analysed. Followed by this, the deformable model used for image segmentation is presented. This model is based upon a geometrical potential force (GPF), which is a function of the image. Both the GPF calculation and level set determination are explained. Following the image segmentation method, a semi-automatic meshing method used in the present study is explained in full detail. All the relevant techniques required to generate a valid domain discretization are presented. These techniques include generating a valid surface mesh, skeletonization, mesh cropping, boundary layer mesh construction and various mesh cosmetic methods that are essential for generating a high-quality domain discretization. After presenting the mesh generation procedure, how to generate flow boundary conditions for both the inlets and outlets of a geometry is explained in detail. This is followed by a brief note on the flow solver, before studying the blood flow through the carotid artery with a severe stenosis.

ps

[BibTex]

[BibTex]


 Geometrically Induced Force Interaction for Three-Dimensional Deformable Models
Geometrically Induced Force Interaction for Three-Dimensional Deformable Models

Si Yong Yeo, Xianghua Xie, Igor Sazonov, Perumal Nithiarasu

IEEE Transactions on Image Processing, 20(5):1373 - 1387, 2011 (article)

Abstract
In this paper, we propose a novel 3-D deformable model that is based upon a geometrically induced external force field which can be conveniently generalized to arbitrary dimensions. This external force field is based upon hypothesized interactions between the relative geometries of the deformable model and the object boundary characterized by image gradient. The evolution of the deformable model is solved using the level set method so that topological changes are handled automatically. The relative geometrical configurations between the deformable model and the object boundaries contribute to a dynamic vector force field that changes accordingly as the deformable model evolves. The geometrically induced dynamic interaction force has been shown to greatly improve the deformable model performance in acquiring complex geometries and highly concave boundaries, and it gives the deformable model a high invariancy in initialization configurations. The voxel interactions across the whole image domain provide a global view of the object boundary representation, giving the external force a long attraction range. The bidirectionality of the external force field allows the new deformable model to deal with arbitrary cross-boundary initializations, and facilitates the handling of weak edges and broken boundaries. In addition, we show that by enhancing the geometrical interaction field with a nonlocal edge-preserving algorithm, the new deformable model can effectively overcome image noise. We provide a comparative study on the segmentation of various geometries with different topologies from both synthetic and real images, and show that the proposed method achieves significant improvements against existing image gradient techniques.

ps

[BibTex]

[BibTex]


no image
Large hidden orbital moments in magnetite

Goering, E.

{Physica Status Solidi B}, 248(10):2345-2351, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Cr magnetization reversal at the CrO2/RuO2 interface: Origin of the reduced GMR effect

Zafar, K., Audehm, P., Schütz, G., Goering, E., Pathak, M., Chetry, K. B., LeClair, P. R., Gupta, A.

{Physical Review B}, 84, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Magnetocaloric effect, magnetic domain structure and spin-reorientation transitios in HoCo5 single crystals

Skokov, K. P., Pastushenkov, Y. G., Koshkid\textquotesingleko, Y. S., Schütz, G., Goll, D., Ivanova, T. I., Nikitin, S. A., Semenova, E. M., Petrenko, A. V.

{Journal of Magnetism and Magnetic Materials}, 323(5):447-450, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Elucidating gating effects for hydrogen sorption in MFU-4-type triazolate-based metal-organic frameworks featuring different pore sizes

Denysenko, D., Grzywa, M., Tonigold, M., Streppel, B., Krkljus, I., Hirscher, M., Mugnaioli, E., Kolb, U., Hanss, J., Volkmer, D.

{Chemistry - A European Journal}, 17(6):1837-1848, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
BET specific surface area and pore structure of MOFs determined by hydrogen adsorption at 20 K

Streppel, B., Hirscher, M.

{Physical Chemistry Chemical Physics}, 13(8):3220-3222, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
High contrast magnetic and nonmagnetic sample current microscopy for bulk and transparent samples using soft X-rays

Nolle, D., Weigand, M., Schütz, G., Goering, E.

{Microscopy and Microanalysis}, 17, pages: 834-842, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Magnetic vortex core reversal by rotating magnetic fields generated on micrometer length scales

Curcic, M., Stoll, H., Weigand, M., Sackmann, V., Jüllig, P., Kammerer, M., Noske, M., Sproll, M., Van Waeyenberge, B., Vansteenkiste, A., Woltersdorf, G., Tyliszczak, T., Schütz, G.

{Physica Status Solidi B}, 248(10):2317-2322, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Enhancing adhesion of biologically inspired polymer microfibers with a viscous oil coating

Cheung, E., Sitti, M.

The Journal of Adhesion, 87(6):547-557, Taylor & Francis Group, 2011 (article)

pi

Project Page [BibTex]

Project Page [BibTex]


no image
Formation of two amorphous phases in the Ni60Nb18Y22 alloy after high pressure torsion

Straumal, B. B., Mazilkin, A. A., Protasova, S. G., Goll, D., Baretzky, B., Bakai, A. S., Dobatkin, S. V.

{Kovove Materialy-Metallic Materials}, 49(1):17-22, 2011 (article)

mms

link (url) [BibTex]

link (url) [BibTex]


no image
Structure and properties of nanograined Fe-C alloys after severe plastic deformation

Straumal, B. B., Dobatkin, S. V., Rodin, A. O., Protasova, S. G., Mazilkin, A. A., Goll, D., Baretzky, B.

{Advanced Engineering Materials}, 13(6):463-469, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Increased flux pinning in YBa2Cu3O7-δthin-film devices through embedding of Au nano crystals

Katzer, C., Schmidt, M., Michalowski, P., Kuhwald, D., Schmidl, F., Grosse, V., Treiber, S., Stahl, C., Albrecht, J., Hübner, U., Undisz, A., Rettenmayr, M., Schütz, G., Seidel, P.

{Europhysics Letters}, 95(6), 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Signal transfer in a chain of stray-field coupled ferromagnetic squares

Vogel, A., Martens, M., Weigand, M., Meier, G.

{Applied Physics Letters}, 99, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Electron theory of magnetoelectric effects in metallic ferromagnetic nanostructures

Subkow, S., Fähnle, M.

{Physical Review B}, 84, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Magnetic antivortex-core reversal by rotating magnetic fields

Kamionka, T., Martens, M., Chou, K., Drews, A., Tyliszczak, T., Stoll, H., Van Waeyenberge, B., Meier, G.

{Physical Review B}, 83, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Magnetic properties of exchange-spring composite films

Kronmüller, H., Goll, D.

{Physica Status Solidi B}, 248(10):2361-2367, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Wetting transition of grain boundaries in the Sn-rich part of the Sn-Bi phase diagram

Yeh, C.-H., Chang, L.-S., Straumal, B. B.

{Journal of Materials Science}, 46(5):1557-1562, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Piezoelectric polymer fiber arrays for tactile sensing applications

Sümer, B., Aksak, B., Şsahin, K., Chuengsatiansup, K., Sitti, M.

Sensor Letters, 9(2):457-463, American Scientific Publishers, 2011 (article)

pi

Project Page [BibTex]

Project Page [BibTex]


no image
Control methodologies for a heterogeneous group of untethered magnetic micro-robots

Floyd, S., Diller, E., Pawashe, C., Sitti, M.

The International Journal of Robotics Research, 30(13):1553-1565, SAGE Publications, 2011 (article)

pi

[BibTex]

[BibTex]


Computational flow studies in a subject-specific human upper airway using a one-equation turbulence model. Influence of the nasal cavity
Computational flow studies in a subject-specific human upper airway using a one-equation turbulence model. Influence of the nasal cavity

Prihambodo Saksono, Perumal Nithiarasu, Igor Sazonov, Si Yong Yeo

International Journal for Numerical Methods in Biomedical Engineering, 87(1-5):96–114, 2011 (article)

Abstract
This paper focuses on the impact of including nasal cavity on airflow through a human upper respiratory tract. A computational study is carried out on a realistic geometry, reconstructed from CT scans of a subject. The geometry includes nasal cavity, pharynx, larynx, trachea and two generations of airway bifurcations below trachea. The unstructured mesh generation procedure is discussed in some length due to the complex nature of the nasal cavity structure and poor scan resolution normally available from hospitals. The fluid dynamic studies have been carried out on the geometry with and without the inclusion of the nasal cavity. The characteristic-based split scheme along with the one-equation Spalart–Allmaras turbulence model is used in its explicit form to obtain flow solutions at steady state. Results reveal that the exclusion of nasal cavity significantly influences the resulting solution. In particular, the location of recirculating flow in the trachea is dramatically different when the truncated geometry is used. In addition, we also address the differences in the solution due to imposed, equally distributed and proportionally distributed flow rates at inlets (both nares). The results show that the differences in flow pattern between the two inlet conditions are not confined to the nasal cavity and nasopharyngeal region, but they propagate down to the trachea.

ps

[BibTex]

[BibTex]


no image
Influence of dot size and annealing on the magnetic properties of large-area L10-FePt nanopatterns

Bublat, T., Goll, D.

{Journal of Applied Physics}, 110(7), 2011 (article)

mms

DOI [BibTex]


no image
The temperature-dependent magnetization profile across an epitaxial bilayer of ferromagnetic La2/3Ca1/3MnO3 and superconducting YBa2Cu3O7-δ

Brück, S., Treiber, S., Macke, S., Audehm, P., Christiani, G., Soltan, S., Habermeier, H., Goering, E., Albrecht, J.

{New Journal of Physics}, 13(3), 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Spin interactions in bcc and fcc Fe beyond the Heisenberg model

Singer, R., Dietermann, F., Fähnle, M.

{Physical Review Letters}, 107, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Route to a family of robust, non-interpenetrated metal-organic frameworks with pto-like topology

Klein, N., Senkovska, I., Baburin, I. A., Grünker, R., Stoeck, U., Schlichtenmayer, M., Streppel, B., Mueller, U., Leoni, S., Hirscher, M., Kaskel, S.

{Chemistry - A European Journal}, 17(46):13007-13016, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Initial stages of growth of iron on silicon for spin injection through Schottky barrier

Dash, S. P., Carstanjen, H. D.

{Physica Status Solidi B}, 248(10):2300-2304, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Fe3O4/ZnO: A high-quality magnetic oxide-semiconductor heterostructure by reactive deposition

Paul, M., Kufer, D., Müller, A., Brück, S., Goering, E., Kamp, M., Verbeeck, J., Tian, H., Van Tendeloo, G., Ingle, N. J. C., Sing, M., Claessen, R.

{Applied Physics Letters}, 98, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Influence of texture on the ferromagnetic properties of nanograined ZnO films

Straumal, B., Mazilkin, A., Protasova, S., Myatiev, A., Straumal, P., Goering, E., Baretzky, B.

{Physica Status Solidi B}, 248(7):1581-1586, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Control of spin configuration in half-metallic La0.7Sr0.3MnO3 nano-structures

Rhensius, J., Vaz, C. A. F., Bisig, A., Schweitzer, S., Heidler, J., Körner, H. S., Locatelli, A., Niño, M. A., Weigand, M., Méchin, L., Gaucher, F., Goering, E., Heyderman, L. J., Kläui, M.

{Applied Physics Letters}, 99(6), 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Comparison of various sol-gel derived metal oxide layers for inverted organic solar cells

Oh, H., Krantz, J., Litzov, I., Stubhan, T., Pinna, L., Brabec, C. J.

{Solar Energy Materials \& Solar Cells}, 95(8):2194-2199, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


Predicting Articulated Human Motion from Spatial Processes
Predicting Articulated Human Motion from Spatial Processes

Soren Hauberg, Kim S. Pedersen

International Journal of Computer Vision, 94, pages: 317-334, Springer Netherlands, 2011 (article)

ps

Publishers site Code Paper site PDF [BibTex]

Publishers site Code Paper site PDF [BibTex]

2005


no image
Kernel Methods for Measuring Independence

Gretton, A., Herbrich, R., Smola, A., Bousquet, O., Schölkopf, B.

Journal of Machine Learning Research, 6, pages: 2075-2129, December 2005 (article)

Abstract
We introduce two new functionals, the constrained covariance and the kernel mutual information, to measure the degree of independence of random variables. These quantities are both based on the covariance between functions of the random variables in reproducing kernel Hilbert spaces (RKHSs). We prove that when the RKHSs are universal, both functionals are zero if and only if the random variables are pairwise independent. We also show that the kernel mutual information is an upper bound near independence on the Parzen window estimate of the mutual information. Analogous results apply for two correlation-based dependence functionals introduced earlier: we show the kernel canonical correlation and the kernel generalised variance to be independence measures for universal kernels, and prove the latter to be an upper bound on the mutual information near independence. The performance of the kernel dependence functionals in measuring independence is verified in the context of independent component analysis.

ei

PDF PostScript PDF [BibTex]

2005


PDF PostScript PDF [BibTex]


no image
A Unifying View of Sparse Approximate Gaussian Process Regression

Quinonero Candela, J., Rasmussen, C.

Journal of Machine Learning Research, 6, pages: 1935-1959, December 2005 (article)

Abstract
We provide a new unifying view, including all existing proper probabilistic sparse approximations for Gaussian process regression. Our approach relies on expressing the effective prior which the methods are using. This allows new insights to be gained, and highlights the relationship between existing methods. It also allows for a clear theoretically justified ranking of the closeness of the known approximations to the corresponding full GPs. Finally we point directly to designs of new better sparse approximations, combining the best of the existing strategies, within attractive computational constraints.

ei

PDF [BibTex]

PDF [BibTex]


Representing cyclic human motion using functional analysis
Representing cyclic human motion using functional analysis

Ormoneit, D., Black, M. J., Hastie, T., Kjellström, H.

Image and Vision Computing, 23(14):1264-1276, December 2005 (article)

Abstract
We present a robust automatic method for modeling cyclic 3D human motion such as walking using motion-capture data. The pose of the body is represented by a time-series of joint angles which are automatically segmented into a sequence of motion cycles. The mean and the principal components of these cycles are computed using a new algorithm that enforces smooth transitions between the cycles by operating in the Fourier domain. Key to this method is its ability to automatically deal with noise and missing data. A learned walking model is then exploited for Bayesian tracking of 3D human motion.

ps

pdf pdf from publisher DOI [BibTex]

pdf pdf from publisher DOI [BibTex]


no image
Maximal Margin Classification for Metric Spaces

Hein, M., Bousquet, O., Schölkopf, B.

Journal of Computer and System Sciences, 71(3):333-359, October 2005 (article)

Abstract
In order to apply the maximum margin method in arbitrary metric spaces, we suggest to embed the metric space into a Banach or Hilbert space and to perform linear classification in this space. We propose several embeddings and recall that an isometric embedding in a Banach space is always possible while an isometric embedding in a Hilbert space is only possible for certain metric spaces. As a result, we obtain a general maximum margin classification algorithm for arbitrary metric spaces (whose solution is approximated by an algorithm of Graepel. Interestingly enough, the embedding approach, when applied to a metric which can be embedded into a Hilbert space, yields the SVM algorithm, which emphasizes the fact that its solution depends on the metric and not on the kernel. Furthermore we give upper bounds of the capacity of the function classes corresponding to both embeddings in terms of Rademacher averages. Finally we compare the capacities of these function classes directly.

ei

PDF PDF DOI [BibTex]

PDF PDF DOI [BibTex]


no image
Selective integration of multiple biological data for supervised network inference

Kato, T., Tsuda, K., Asai, K.

Bioinformatics, 21(10):2488 , October 2005 (article)

ei

PDF [BibTex]

PDF [BibTex]


no image
Assessing Approximate Inference for Binary Gaussian Process Classification

Kuss, M., Rasmussen, C.

Journal of Machine Learning Research, 6, pages: 1679 , October 2005 (article)

Abstract
Gaussian process priors can be used to define flexible, probabilistic classification models. Unfortunately exact Bayesian inference is analytically intractable and various approximation techniques have been proposed. In this work we review and compare Laplace‘s method and Expectation Propagation for approximate Bayesian inference in the binary Gaussian process classification model. We present a comprehensive comparison of the approximations, their predictive performance and marginal likelihood estimates to results obtained by MCMC sampling. We explain theoretically and corroborate empirically the advantages of Expectation Propagation compared to Laplace‘s method.

ei

PDF PDF [BibTex]

PDF PDF [BibTex]


no image
Clustering on the Unit Hypersphere using von Mises-Fisher Distributions

Banerjee, A., Dhillon, I., Ghosh, J., Sra, S.

Journal of Machine Learning Research, 6, pages: 1345-1382, September 2005 (article)

Abstract
Several large scale data mining applications, such as text categorization and gene expression analysis, involve high-dimensional data that is also inherently directional in nature. Often such data is L2 normalized so that it lies on the surface of a unit hypersphere. Popular models such as (mixtures of) multi-variate Gaussians are inadequate for characterizing such data. This paper proposes a generative mixture-model approach to clustering directional data based on the von Mises-Fisher (vMF) distribution, which arises naturally for data distributed on the unit hypersphere. In particular, we derive and analyze two variants of the Expectation Maximization (EM) framework for estimating the mean and concentration parameters of this mixture. Numerical estimation of the concentration parameters is non-trivial in high dimensions since it involves functional inversion of ratios of Bessel functions. We also formulate two clustering algorithms corresponding to the variants of EM that we derive. Our approach provides a theoretical basis for the use of cosine similarity that has been widely employed by the information retrieval community, and obtains the spherical kmeans algorithm (kmeans with cosine similarity) as a special case of both variants. Empirical results on clustering of high-dimensional text and gene-expression data based on a mixture of vMF distributions show that the ability to estimate the concentration parameter for each vMF component, which is not present in existing approaches, yields superior results, especially for difficult clustering tasks in high-dimensional spaces.

ei

PDF [BibTex]

PDF [BibTex]


no image
Support Vector Machines for 3D Shape Processing

Steinke, F., Schölkopf, B., Blanz, V.

Computer Graphics Forum, 24(3, EUROGRAPHICS 2005):285-294, September 2005 (article)

Abstract
We propose statistical learning methods for approximating implicit surfaces and computing dense 3D deformation fields. Our approach is based on Support Vector (SV) Machines, which are state of the art in machine learning. It is straightforward to implement and computationally competitive; its parameters can be automatically set using standard machine learning methods. The surface approximation is based on a modified Support Vector regression. We present applications to 3D head reconstruction, including automatic removal of outliers and hole filling. In a second step, we build on our SV representation to compute dense 3D deformation fields between two objects. The fields are computed using a generalized SVMachine enforcing correspondence between the previously learned implicit SV object representations, as well as correspondences between feature points if such points are available. We apply the method to the morphing of 3D heads and other objects.

ei

PDF [BibTex]

PDF [BibTex]


no image
Correlation of EEG spectral entropy with regional cerebral blood flow during sevoflurane and propofol anaesthesia

Maksimow, A., Kaisti, K., Aalto, S., Mäenpää, M., Jääskeläinen, S., Hinkka, S., Martens, SMM., Särkelä, M., Viertiö-Oja, H., Scheinin, H.

Anaesthesia, 60(9):862-869, September 2005 (article)

Abstract
ENTROPY index monitoring, based on spectral entropy of the electroencephalogram, is a promising new method to measure the depth of anaesthesia. We examined the association between spectral entropy and regional cerebral blood flow in healthy subjects anaesthetised with 2%, 3% and 4% end-expiratory concentrations of sevoflurane and 7.6, 12.5 and 19.0 microg.ml(-1) plasma drug concentrations of propofol. Spectral entropy from the frequency band 0.8-32 Hz was calculated and cerebral blood flow assessed using positron emission tomography and [(15)O]-labelled water at baseline and at each anaesthesia level. Both drugs induced significant reductions in spectral entropy and cortical and global cerebral blood flow. Midfrontal-central spectral entropy was associated with individual frontal and whole brain blood flow values across all conditions, suggesting that this novel measure of anaesthetic depth can depict global changes in neuronal activity induced by the drugs. The cortical areas of the most significant associations were remarkably similar for both drugs.

ei

DOI [BibTex]

DOI [BibTex]


no image
Fast Protein Classification with Multiple Networks

Tsuda, K., Shin, H., Schölkopf, B.

Bioinformatics, 21(Suppl. 2):59-65, September 2005 (article)

Abstract
Support vector machines (SVM) have been successfully used to classify proteins into functional categories. Recently, to integrate multiple data sources, a semidefinite programming (SDP) based SVM method was introduced Lanckriet et al (2004). In SDP/SVM, multiple kernel matrices corresponding to each of data sources are combined with weights obtained by solving an SDP. However, when trying to apply SDP/SVM to large problems, the computational cost can become prohibitive, since both converting the data to a kernel matrix for the SVM and solving the SDP are time and memory demanding. Another application-specific drawback arises when some of the data sources are protein networks. A common method of converting the network to a kernel matrix is the diffusion kernel method, which has time complexity of O(n^3), and produces a dense matrix of size n x n. We propose an efficient method of protein classification using multiple protein networks. Available protein networks, such as a physical interaction network or a metabolic network, can be directly incorporated. Vectorial data can also be incorporated after conversion into a network by means of neighbor point connection. Similarly to the SDP/SVM method, the combination weights are obtained by convex optimization. Due to the sparsity of network edges, the computation time is nearly linear in the number of edges of the combined network. Additionally, the combination weights provide information useful for discarding noisy or irrelevant networks. Experiments on function prediction of 3588 yeast proteins show promising results: the computation time is enormously reduced, while the accuracy is still comparable to the SDP/SVM method.

ei

PDF Web DOI [BibTex]

PDF Web DOI [BibTex]


no image
Analyzing microarray data using quantitative association rules

Georgii, E., Richter, L., Rückert, U., Kramer, S.

Bioinformatics, 21(Suppl. 2):123-129, September 2005 (article)

Abstract
Motivation: We tackle the problem of finding regularities in microarray data. Various data mining tools, such as clustering, classification, Bayesian networks and association rules, have been applied so far to gain insight into gene-expression data. Association rule mining techniques used so far work on discretizations of the data and cannot account for cumulative effects. In this paper, we investigate the use of quantitative association rules that can operate directly on numeric data and represent cumulative effects of variables. Technically speaking, this type of quantitative association rules based on half-spaces can find non-axis-parallel regularities. Results: We performed a variety of experiments testing the utility of quantitative association rules for microarray data. First of all, the results should be statistically significant and robust against fluctuations in the data. Next, the approach should be scalable in the number of variables, which is important for such high-dimensional data. Finally, the rules should make sense biologically and be sufficiently different from rules found in regular association rule mining working with discretizations. In all of these dimensions, the proposed approach performed satisfactorily. Therefore, quantitative association rules based on half-spaces should be considered as a tool for the analysis of microarray gene-expression data.

ei

Web DOI [BibTex]

Web DOI [BibTex]


no image
Iterative Kernel Principal Component Analysis for Image Modeling

Kim, K., Franz, M., Schölkopf, B.

IEEE Transactions on Pattern Analysis and Machine Intelligence, 27(9):1351-1366, September 2005 (article)

Abstract
In recent years, Kernel Principal Component Analysis (KPCA) has been suggested for various image processing tasks requiring an image model such as, e.g., denoising or compression. The original form of KPCA, however, can be only applied to strongly restricted image classes due to the limited number of training examples that can be processed. We therefore propose a new iterative method for performing KPCA, the Kernel Hebbian Algorithm which iteratively estimates the Kernel Principal Components with only linear order memory complexity. In our experiments, we compute models for complex image classes such as faces and natural images which require a large number of training examples. The resulting image models are tested in single-frame super-resolution and denoising applications. The KPCA model is not specifically tailored to these tasks; in fact, the same model can be used in super-resolution with variable input resolution, or denoising with unknown noise characteristics. In spite of this, both super-resolution a nd denoising performance are comparable to existing methods.

ei

Web DOI [BibTex]

Web DOI [BibTex]


no image
Large Margin Methods for Structured and Interdependent Output Variables

Tsochantaridis, I., Joachims, T., Hofmann, T., Altun, Y.

Journal of Machine Learning Research, 6, pages: 1453-1484, September 2005 (article)

Abstract
Learning general functional dependencies between arbitrary input and output spaces is one of the key challenges in computational intelligence. While recent progress in machine learning has mainly focused on designing flexible and powerful input representations, this paper addresses the complementary issue of designing classification algorithms that can deal with more complex outputs, such as trees, sequences, or sets. More generally, we consider problems involving multiple dependent output variables, structured output spaces, and classification problems with class attributes. In order to accomplish this, we propose to appropriately generalize the well-known notion of a separation margin and derive a corresponding maximum-margin formulation. While this leads to a quadratic program with a potentially prohibitive, i.e. exponential, number of constraints, we present a cutting plane algorithm that solves the optimization problem in polynomial time for a large class of problems. The proposed method has important applications in areas such as computational biology, natural language processing, information retrieval/extraction, and optical character recognition. Experiments from various domains involving different types of output spaces emphasize the breadth and generality of our approach.

ei

PDF [BibTex]

PDF [BibTex]


no image
Contact Location Display for Haptic Perception of Curvature and Object Motion

Provancher, W. R., Cutkosky, M. R., Kuchenbecker, K. J., Niemeyer, G.

International Journal of Robotics Research, 24(9):691-702, sep 2005 (article)

hi

[BibTex]

[BibTex]


no image
Gene Expression Profiling of Serum- and Interleukin-1beta-Stimulated Primary Human Adult Articular Chondrocytes - A Molecular Analysis Based on Chondrocytes Isolated from One Donor

Aigner, T., McKenna, L., Zien, A., Fan, Z., Gebhard, P., Zimmer, R.

Cytokine, 31(3):227-240, August 2005 (article)

Abstract
In order to understand the cellular disease mechanisms of osteoarthritic cartilage degeneration it is of primary importance to understand both the anabolic and the catabolic processes going on in parallel in the diseased tissue. In this study, we have applied cDNA-array technology (Clontech) to study gene expression patterns of primary human normal adult articular chondrocytes isolated from one donor cultured under anabolic (serum) and catabolic (IL-1beta) conditions. Significant differences between the different in vitro cultures tested were detected. Overall, serum and IL-1beta significantly altered gene expression levels of 102 and 79 genes, respectively. IL-1beta stimulated the matrix metalloproteinases-1, -3, and -13 as well as members of its intracellular signaling cascade, whereas serum increased the expression of many cartilage matrix genes. Comparative gene expression analysis with previously published in vivo data (normal and osteoarthritic cartilage) showed significant differences of all in vitro s timulations compared to the changes detected in osteoarthritic cartilage in vivo. This investigation allowed us to characterize gene expression profiles of two classical anabolic and catabolic stimuli of human adult articular chondrocytes in vitro. No in vitro model appeared to be adequate to study overall gene expression alterations in osteoarthritic cartilage. Serum stimulated in vitro cultures largely reflected the results that were only consistent with the anabolic activation seen in osteoarthritic chondrocytes. In contrast, IL-1beta did not appear to be a good model for mimicking catabolic gene alterations in degenerating chondrocytes.

ei

Web [BibTex]