Header logo is


2007


no image
Magnetic moment of Fe in oxide-free FePt nanoparticles

Dmitrieva, O., Spasova, M., Antoniak, C., Acet, M., Dumpich, G., Kästner, J., Farle, M., Fauth, K., Wiedwald, U., Boyen, H.-G., Ziemann, P.

{Physical Review B}, 76, 2007 (article)

mms

[BibTex]

2007


[BibTex]


no image
The effect of bismuth segregation on the faceting of \Sigma3 and \Sigma9 coincidence boundaries in copper bicrystals

Straumal, B. B., Polyakov, S. A., Chang, L.-S., Mittemeijer, E. J.

{International Journal of Materials Research}, 98, pages: 451-456, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Hot isostatic pressing of Cu-Bi polycrystals with liquid-like grain boundary layers

Chang, L.-S., Straumal, B., Rabkin, E., Lojkowski, W., Gust, W.

{Acta Materialia}, 55, pages: 335-343, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Spatially resolved magnetic response in core shell nanoparticles

Fauth, K., Goering, E., Theil Kuhn, L.

{Modern Physics Letters B}, 21(18):1197-1200, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Interfaces in semiconductor/metal radial superlattices

Deneke, C., Sigle, W., Eigenthaler, U., van Aken, P. A., Schütz, G., Schmidt, O. G.

{Applied Physics Letters}, 90, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Live cell adhesion assay with attenuated total reflection infrared spectroscopy

Schmidt, M., Wolfram, T., Rumpler, M., Tripp, C. P., Grunze, M.

{Biointerphases}, 2(1):1-5, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Unusual Co moment reduction in the NiCoO/Co exchange bias system

Brück, S., Goering, E., Tang, Y. J., Schütz, G., Berkowitz, A. E.

{Journal of Magnetism and Magnetic Materials}, 310, pages: 2316-2318, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Adhesion of biologically inspired vertical and angled polymer microfiber arrays

Aksak, B., Murphy, M. P., Sitti, M.

Langmuir, 23(6):3322-3332, ACS Publications, 2007 (article)

pi

Project Page [BibTex]

Project Page [BibTex]


no image
Waalbot: An agile small-scale wall-climbing robot utilizing dry elastomer adhesives

Murphy, M. P., Sitti, M.

IEEE/ASME transactions on Mechatronics, 12(3):330-338, IEEE, 2007 (article)

pi

[BibTex]

[BibTex]


no image
Ab initio calculations of adiabatic magnon spectra using the atomic-sphere aproximation for the spin direction

Singer, R., Dietermann, F., Steiauf, D., Fähnle, M.

{Physical Review B}, 76, 2007 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Low-temperature thermal-desorption mass spectroscopy applied to investigate the hydrogen adsorption on porous materials

Panella, B., Hirscher, M., Ludescher, B.

{Microporous and Mesoporous Materials}, 103, pages: 230-234, 2007 (article)

mms

[BibTex]


no image
Dependence of the critical temperature of YBCO thin films on spinpolarized quasiparticle injection

Habermeier, H.-U., Soltan, S., Albrecht, J.

{International Journal of Modern Physics B}, 21(18 \& 19):3303-3306, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Copper alloys for the restoration of reed pipes in historic organs

Straumal, B. B., Baretzky, B., Kalnins, J., Aslund, A., Friesel, M.

{Journal of Functional Materials}, 1, pages: 4-10, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Inhomogeneous vortex distribution and magnetic coupling in oxide superconductor-ferromagnet hybrids

Albrecht, J., Djupmyr, M., Soltan, S., Habermeier, H.-U., Connolly, M. R., Bending, S. J.

{New Journal of Physics}, 9, 2007 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Metal hydride materials for solid hydrogen storage: a review

Sakintuna, B., Lamari-Darkrim, F., Hirscher, M.

{International Journal of Hydrogen Energy}, 32, pages: 1121-1140, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Thermal reversal of exchange spring composite media in magnetic fields

Goll, D., Macke, S., Bertram, H. N.

{Applied Physics Letters}, 90, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Magnetism of Co-doped ZnO thin films

Gacic, M., Jakob, G., Herbort, C., Adrian, H., Tietze, T., Brück, S., Goering, E.

{Physical Review B}, 75, 2007 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
iCub - The Design and Realization of an Open Humanoid Platform for Cognitive and Neuroscience Research

Tsagarakis, N., Metta, G., Sandini, G., Vernon, D., Beira, R., Becchi, F., Righetti, L., Santos-Victor, J., Ijspeert, A., Carrozza, M., Caldwell, D.

Advanced Robotics, 21(10):1151-1175, 2007 (article)

Abstract
The development of robotic cognition and the advancement of understanding of human cognition form two of the current greatest challenges in robotics and neuroscience, respectively. The RobotCub project aims to develop an embodied robotic child (iCub) with the physical (height 90 cm and mass less than 23 kg) and ultimately cognitive abilities of a 2.5-year-old human child. The iCub will be a freely available open system which can be used by scientists in all cognate disciplines from developmental psychology to epigenetic robotics to enhance understanding of cognitive systems through the study of cognitive development. The iCub will be open both in software, but more importantly in all aspects of the hardware and mechanical design. In this paper the design of the mechanisms and structures forming the basic 'body' of the iCub are described. The papers considers kinematic structures dynamic design criteria, actuator specification and selection, and detailed mechanical and electronic design. The paper concludes with tests of the performance of sample joints, and comparison of these results with the design requirements and simulation projects.

mg

link (url) DOI [BibTex]

link (url) DOI [BibTex]


no image
Subfeature patterning of organic and inorganic materials using robotic assembly

Tafazzoli, A., Cheng, C., Pawashe, C., Sabo, E. K., Trofin, L., Sitti, M., LeDuc, P. R.

Journal of materials research, 22(06):1601-1608, Cambridge University Press, 2007 (article)

pi

[BibTex]

[BibTex]


no image
Effect of backing layer thickness on adhesion of single-level elastomer fiber arrays

Kim, S., Sitti, M., Hui, C., Long, R., Jagota, A.

Applied Physics Letters, 91(16):161905, AIP, 2007 (article)

pi

[BibTex]

[BibTex]


no image
Universal temperature scaling of flux line pinning in high-temperature superconducting thin films

Albrecht, J., Djupmyr, M., Brück, S.

{Journal of Physics: Condensed Matter}, 19, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Dependence of the critical temperature of YBCO thin films on spin-polarized quasiparticle injection

Habermeier, H.-U., Soltan, S., Albrecht, J.

{Physica C}, 460-462, pages: 32-35, 2007 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Interaction of ferromagnetic LCMO layers through a superconducting YBCO spacer

Ravikumar, G., Yashwant, G., Singh, M. R., Gupta, S. K., Bhattacharya, S., Soltan, S., Albrecht, J., Habermeier, H.-U.

{Physica C}, 460-462, pages: 1375-1376, 2007 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Vortex dynamics in Permalloy disks with artificial defects: suppression of the gyrotropic mode

Kuepper, K., Bischoff, L., Akhmadaliev, C., Fassbinder, J., Stoll, H., Chou, K., Puzic, A., Fauth, K., Dolgos, D., Schütz, G., Van Waeyenberge, B., Tyliszczak, T., Neudecker, I., Woltersdorf, G., Back, C.

{Appplied Physics Letters}, 90, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Vacancy-interstitial annihilation in titanomagnetite by thermal annealing

Walz, F., Brabers, V. A. M., Brabers, J. H. V. J., Kronmüller, H.

{Physica Status Solidi (A)}, 204(10):3514-3525, 2007 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Theory of X-ray absorption spectroscopy in solids: mixing of the core states by the aspherical effective potential

Kostoglou, C., Komelj, M., Fähnle, M.

{Physical Review B}, 75, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Zinc oxide microcapsules obtained via a bio-inspired approach

Lipowsky, P., Hirscher, M., Hoffmann, R. C., Bill, J., Aldinger, F.

{Nanotechnology}, 18, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Grain boundary phase observed in Al-5 at.\textpercent Zn alloy by using HREM

Straumal, B. B., Mazilkin, A. A., Kogtenkova, O. A., Protasova, S. G., Baretzky, B.

{Philosophical Magazine Letters}, 87(6):423-430, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Transport current improvements of in situ MgB2 tapes by the addition of carbon nanotubes, silicon carbide or graphite

Kovac, P., Husek, I., Skakalova, V., Meyer, J., Dobrocka, E., Hirscher, M., Roth, S.

{Superconductor Science and Technology}, 20, pages: 105-111, 2007 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Adhesion and anisotropic friction enhancements of angled heterogeneous micro-fiber arrays with spherical and spatula tips

Murphy, M. P., Aksak, B., Sitti, M.

Journal of Adhesion Science and Technology, 21(12-13):1281-1296, Taylor & Francis Group, 2007 (article)

pi

Project Page [BibTex]

Project Page [BibTex]


no image
Surface-tension-driven biologically inspired water strider robots: Theory and experiments

Song, Y. S., Sitti, M.

IEEE Transactions on robotics, 23(3):578-589, IEEE, 2007 (article)

pi

[BibTex]

[BibTex]


no image
Absorption spectroscopy and XMCD at the Verwey transition of Fe3O4

Goering, E., Lafkioti, M., Gold, S., Schütz, G.

{Journal of Magnetism and Magnetic Materials}, 310, pages: 249-251, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Overcoming the Dipolar Disorder in Dense CoFe Nanoparticle Ensembles: Superferromagnetism

Bedanta, S., Eimüller, T., Kleemann, W., Rhensius, J., Stromberg, F., Amaladass, E., Cardoso, S., Freitas, P. P.

{Physical Review Letters}, 98, 2007 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Ultrafast nanomagnetic toggle switching of vortex cores

Hertel, R., Gliga, S., Fähnle, M., Schneider, C. M.

{Physical Review Letters}, 98, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Element-specific spin and orbital momentum dynamics of Fe/Gd multilayers

Bartelt, A. F., Comin, A., Feng, J., Nasiatka, J. R., Eimüller, T., Ludescher, B., Schütz, G., Padmore, H. A., Young, A. T., Scholl, A.

{Applied Physics Letters}, 90, 2007 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Slow relaxation of spin reorientation following ultrafast optical excitation

Eimüller, T., Scholl, A., Ludescher, B., Schütz, G., Thiele, J.

{Applied Physics Letters}, 91, 2007 (article)

mms

[BibTex]

[BibTex]


no image
One-pot synthesis of core-shell FeRh nanoparticles

Ciuculescu, D., Amiens, C., Respaud, M., Falqui, A., Lecante, P., Benfield, R. E., Jiang, L., Fauth, K., Chaudret, B.

{Chemistry of Materials}, 19(19):4624-4626, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Spin-polarized quasiparticles injection effects in the normal state of YBCO thin films

Soltan, S., Albrecht, J., Habermeier, H.-U.

{Physica C}, 460-462, pages: 1088-1089, 2007 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Direct observation of the vortex core magnetization and its dynamics

Chou, K. W., Puzic, A., Stoll, H., Dolgos, D., Schütz, G., Van Waeyenberge, B., Vansteenkiste, A., Tyliszczak, T., Woltersdorf, G., Back, C. H.

{Applied Physics Letters}, 90, 2007 (article)

mms

[BibTex]

[BibTex]


no image
Superparamagnetism in small Fe clusters on Cu(111)

Ballentine, G., He\ssler, M., Kinza, M., Fauth, K.

{The European Physical Journal D}, 45, pages: 535-537, 2007 (article)

mms

DOI [BibTex]

DOI [BibTex]

1996


no image
A Kendama learning robot based on bi-directional theory

Miyamoto, H., Schaal, S., Gandolfo, F., Koike, Y., Osu, R., Nakano, E., Wada, Y., Kawato, M.

Neural Networks, 9(8):1281-1302, 1996, clmc (article)

Abstract
A general theory of movement-pattern perception based on bi-directional theory for sensory-motor integration can be used for motion capture and learning by watching in robotics. We demonstrate our methods using the game of Kendama, executed by the SARCOS Dextrous Slave Arm, which has a very similar kinematic structure to the human arm. Three ingredients have to be integrated for the successful execution of this task. The ingredients are (1) to extract via-points from a human movement trajectory using a forward-inverse relaxation model, (2) to treat via-points as a control variable while reconstructing the desired trajectory from all the via-points, and (3) to modify the via-points for successful execution. In order to test the validity of the via-point representation, we utilized a numerical model of the SARCOS arm, and examined the behavior of the system under several conditions.

am

link (url) [BibTex]

1996


link (url) [BibTex]


no image
One-handed juggling: A dynamical approach to a rhythmic movement task

Schaal, S., Sternad, D., Atkeson, C. G.

Journal of Motor Behavior, 28(2):165-183, 1996, clmc (article)

Abstract
The skill of rhythmic juggling a ball on a racket is investigated from the viewpoint of nonlinear dynamics. The difference equations that model the dynamical system are analyzed by means of local and non-local stability analyses. These analyses yield that the task dynamics offer an economical juggling pattern which is stable even for open-loop actuator motion. For this pattern, two types of pre dictions are extracted: (i) Stable periodic bouncing is sufficiently characterized by a negative acceleration of the racket at the moment of impact with the ball; (ii) A nonlinear scaling relation maps different juggling trajectories onto one topologically equivalent dynamical system. The relevance of these results for the human control of action was evaluated in an experiment where subjects performed a comparable task of juggling a ball on a paddle. Task manipulations involved different juggling heights and gravity conditions of the ball. The predictions were confirmed: (i) For stable rhythmic performance the paddle's acceleration at impact is negative and fluctuations of the impact acceleration follow predictions from global stability analysis; (ii) For each subject, the realizations of juggling for the different experimental conditions are related by the scaling relation. These results allow the conclusion that for the given task, humans reliably exploit the stable solutions inherent to the dynamics of the task and do not overrule these dynamics by other control mechanisms. The dynamical scaling serves as an efficient principle to generate different movement realizations from only a few parameter changes and is discussed as a dynamical formalization of the principle of motor equivalence.

am

link (url) [BibTex]

link (url) [BibTex]

1993


no image
Design concurrent calculation: A CAD- and data-integrated approach

Schaal, S., Ehrlenspiel, K.

Journal of Engineering Design, 4, pages: 71-85, 1993, clmc (article)

Abstract
Besides functional regards, product design demands increasingly more for further reaching considerations. Quality alone cannot suffice anymore to compete in the market; design for manufacturability, for assembly, for recycling, etc., are well-known keywords. Those can largely be reduced to the necessity of design for costs. This paper focuses on a CAD-based approach to design concurrent calculation. It will discuss how, in the meantime well-established, tools like feature technology, knowledge-based systems, and relational databases can be blended into one coherent concept to achieve an entirely CAD- and data-integrated cost information tool. This system is able to extract data from the CAD-system, combine it with data about the company specific manufacturing environment, and subsequently autonomously evaluate manufacturability aspects and costs of the given CAD-model. Within minutes the designer gets quantitative in-formation about the major cost sources of his/her design. Additionally, some alternative methods for approximating manu-facturing times from empirical data, namely neural networks and local weighted regression, are introduced.

am

[BibTex]

1993


[BibTex]