Header logo is


2016


Soft continuous microrobots with multiple intrinsic degrees of freedom
Soft continuous microrobots with multiple intrinsic degrees of freedom

Palagi, S., Mark, A. G., Melde, K., Zeng, H., Parmeggiani, C., Martella, D., Wiersma, D. S., Fischer, P.

In 2016 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), pages: 1-5, July 2016 (inproceedings)

Abstract
One of the main challenges in the development of microrobots, i.e. robots at the sub-millimeter scale, is the difficulty of adopting traditional solutions for power, control and, especially, actuation. As a result, most current microrobots are directly manipulated by external fields, and possess only a few passive degrees of freedom (DOFs). We have reported a strategy that enables embodiment, remote powering and control of a large number of DOFs in mobile soft microrobots. These consist of photo-responsive materials, such that the actuation of their soft continuous body can be selectively and dynamically controlled by structured light fields. Here we use finite-element modelling to evaluate the effective number of DOFs that are addressable in our microrobots. We also demonstrate that by this flexible approach different actuation patterns can be obtained, and thus different locomotion performances can be achieved within the very same microrobot. The reported results confirm the versatility of the proposed approach, which allows for easy application-specific optimization and online reconfiguration of the microrobot's behavior. Such versatility will enable advanced applications of robotics and automation at the micro scale.

pf

DOI [BibTex]

2016


DOI [BibTex]


Wireless actuator based on ultrasonic bubble streaming
Wireless actuator based on ultrasonic bubble streaming

Qiu, T., Palagi, S., Mark, A. G., Melde, K., Fischer, P.

In 2016 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), pages: 1-5, July 2016 (inproceedings)

Abstract
Miniaturized actuators are a key element for the manipulation and automation at small scales. Here, we propose a new miniaturized actuator, which consists of an array of micro gas bubbles immersed in a fluid. Under ultrasonic excitation, the oscillation of micro gas bubbles results in acoustic streaming and provides a propulsive force that drives the actuator. The actuator was fabricated by lithography and fluidic streaming was observed under ultrasound excitation. Theoretical modelling and numerical simulations were carried out to show that lowing the surface tension results in a larger amplitude of the bubble oscillation, and thus leads to a higher propulsive force. Experimental results also demonstrate that the propulsive force increases 3.5 times when the surface tension is lowered by adding a surfactant. An actuator with a 4×4 mm 2 surface area provides a driving force of about 0.46 mN, suggesting that it is possible to be used as a wireless actuator for small-scale robots and medical instruments.

pf

link (url) DOI [BibTex]

link (url) DOI [BibTex]


Auxetic Metamaterial Simplifies Soft Robot Design
Auxetic Metamaterial Simplifies Soft Robot Design

Mark, A. G., Palagi, S., Qiu, T., Fischer, P.

In 2016 IEEE Int. Conf. on Robotics and Automation (ICRA), pages: 4951-4956, May 2016 (inproceedings)

Abstract
Soft materials are being adopted in robotics in order to facilitate biomedical applications and in order to achieve simpler and more capable robots. One route to simplification is to design the robot's body using `smart materials' that carry the burden of control and actuation. Metamaterials enable just such rational design of the material properties. Here we present a soft robot that exploits mechanical metamaterials for the intrinsic synchronization of two passive clutches which contact its travel surface. Doing so allows it to move through an enclosed passage with an inchworm motion propelled by a single actuator. Our soft robot consists of two 3D-printed metamaterials that implement auxetic and normal elastic properties. The design, fabrication and characterization of the metamaterials are described. In addition, a working soft robot is presented. Since the synchronization mechanism is a feature of the robot's material body, we believe that the proposed design will enable compliant and robust implementations that scale well with miniaturization.

pf

link (url) DOI [BibTex]

link (url) DOI [BibTex]


Towards Photo-Induced Swimming: Actuation of Liquid Crystalline  Elastomer in Water
Towards Photo-Induced Swimming: Actuation of Liquid Crystalline Elastomer in Water

cerretti, G., Martella, D., Zeng, H., Parmeggiani, C., Palagi, S., Mark, A. G., Melde, K., Qiu, T., Fischer, P., Wiersma, D.

In Proc. of SPIE 9738, pages: Laser 3D Manufacturing III, 97380T, April 2016 (inproceedings)

Abstract
Liquid Crystalline Elastomers (LCEs) are very promising smart materials that can be made sensitive to different external stimuli, such as heat, pH, humidity and light, by changing their chemical composition. In this paper we report the implementation of a nematically aligned LCE actuator able to undergo large light-induced deformations. We prove that this property is still present even when the actuator is submerged in fresh water. Thanks to the presence of azo-dye moieties, capable of going through a reversible trans-cis photo-isomerization, and by applying light with two different wavelengths we managed to control the bending of such actuator in the liquid environment. The reported results represent the first step towards swimming microdevices powered by light.

pf

link (url) DOI [BibTex]

link (url) DOI [BibTex]

2015


3D-printed Soft Microrobot for Swimming in Biological Fluids
3D-printed Soft Microrobot for Swimming in Biological Fluids

Qiu, T., Palagi, S., Fischer, P.

In Conf. Proc. IEEE Eng. Med. Biol. Soc., pages: 4922-4925, August 2015 (inproceedings)

Abstract
Microscopic artificial swimmers hold the potential to enable novel non-invasive medical procedures. In order to ease their translation towards real biomedical applications, simpler designs as well as cheaper yet more reliable materials and fabrication processes should be adopted, provided that the functionality of the microrobots can be kept. A simple single-hinge design could already enable microswimming in non-Newtonian fluids, which most bodily fluids are. Here, we address the fabrication of such single-hinge microrobots with a 3D-printed soft material. Firstly, a finite element model is developed to investigate the deformability of the 3D-printed microstructure under typical values of the actuating magnetic fields. Then the microstructures are fabricated by direct 3D-printing of a soft material and their swimming performances are evaluated. The speeds achieved with the 3D-printed microrobots are comparable to those obtained in previous work with complex fabrication procedures, thus showing great promise for 3D-printed microrobots to be operated in biological fluids.

pf

link (url) DOI [BibTex]

2015


link (url) DOI [BibTex]


no image
Human Machine Interface for Dexto Eka: - The humanoid robot

Kumra, S., Mohan, M., Gupta, S., Vaswani, H.

In Proceedings of the IEEE International Conference on Robotics, Automation, Control and Embedded Systems (RACE), Chennai, India, Febuary 2015 (inproceedings)

Abstract
This paper illustrates hybrid control system of the humanoid robot, Dexto:Eka: focusing on the dependent or slave mode. Efficiency of any system depends on the fluid operation of its control system. Here, we elucidate the control of 12 DoF robotic arms and an omnidirectional mecanum wheel drive using an exo-frame, and a Graphical User Interface (GUI) and a control column. This paper comprises of algorithms, control mechanisms and overall flow of execution for the regulation of robotic arms, graphical user interface and locomotion.

hi

DOI [BibTex]

DOI [BibTex]


no image
Conception and development of Dexto:Eka: The Humanoid Robot - Part IV

Kumra, S., Mohan, M., Vaswani, H., Gupta, S.

In Proceedings of the IEEE International Conference on Robotics, Automation, Control and Embedded Systems (RACE), Febuary 2015 (inproceedings)

Abstract
This paper elucidates the fourth phase of the development of `Dexto:Eka: - The Humanoid Robot'. It lays special emphasis on the conception of the locomotion drive and the development of vision based system that aids navigation and tele-operation. The first three phases terminated with the completion of two robotic arms with six degrees of freedom each, structural development and the creation of a human machine interface that included an exo-frame, a control column and a graphical user interface. This phase also involved the enhancement of the exo-frame to a vision based system using a Kinect camera. The paper also focuses on the reasons behind choosing the locomotion drive and the benefits it has.

hi

DOI [BibTex]

DOI [BibTex]


no image
Combined FORC and x-ray microscopy study of magnetisation reversal in antidot lattices

Gräfe, J., Haering, F., Stahl, C., Weigand, M., Skripnik, M., Nowak, U., Ziemann, P., Wiedwald, U., Schütz, G., Goering, E.

In IEEE International Magnetics Conference (INTERMAG 2015), IEEE, Beijing, China, 2015 (inproceedings)

mms

DOI Project Page Project Page [BibTex]

DOI Project Page Project Page [BibTex]


no image
Local control of domain wall dynamics in ferromagnetic rings

Richter, K., Mawass, M., Krone, A., Krüger, B., Weigand, M., Stoll, H., Schütz, G., Kläui, M.

In IEEE International Magnetics Conference (INTERMAG 2015), IEEE, Beijing, China, 2015 (inproceedings)

mms

DOI [BibTex]

DOI [BibTex]


no image
Ultrafast demagnetization after laser pulse irradiation in Ni: Ab-initio electron-phonon scattering and phase space calculations

Illg, C., Haag, M., Fähnle, M.

In Ultrafast Magnetism I. Proceedings of the International Conference UMC 2013, 159, pages: 131-133, Springer Proceedings in Physics, Springer, Strasbourg, 2015 (inproceedings)

mms

DOI [BibTex]

DOI [BibTex]


no image
Automotive domain wall propagation in ferromagnetic rings

Richter, K., Mawass, M., Krone, A., Krüger, B., Weigand, M., Schütz, G., Stoll, H., Kläui, M.

In IEEE International Magnetics Conference (INTERMAG 2015), IEEE, Beijing, China, 2015 (inproceedings)

mms

DOI [BibTex]

DOI [BibTex]


no image
The third dimension: Vortex core reversal by interaction with \textquotesingleflexure modes’

Noske, M., Stoll, H., Fähnle, M., Weigand, M., Dieterle, G., Förster, J., Gangwar, A., Slavin, A., Back, C. H., Schütz, G.

In IEEE International Magnetics Conference (INTERMAG 2015), IEEE, Beijing, China, 2015 (inproceedings)

mms

DOI [BibTex]

DOI [BibTex]


no image
Skyrmions at room temperature in magnetic multilayers

Moreau-Luchaire, C., Reyren, N., Moutafis, C., Sampaio, J., Van Horne, N., Vaz, C. A., Warnicke, P., Garcia, K., Weigand, M., Bouzehouane, K., Deranlot, C., George, J., Raabe, J., Cros, V., Fert, A.

In IEEE International Magnetics Conference (INTERMAG 2015), IEEE, Beijing, China, 2015 (inproceedings)

mms

DOI [BibTex]

DOI [BibTex]

2014


3D nanofabrication on complex seed shapes using glancing angle deposition
3D nanofabrication on complex seed shapes using glancing angle deposition

Hyeon-Ho, J., Mark, A. G., Gibbs, J. G., Reindl, T., Waizmann, U., Weis, J., Fischer, P.

In 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), pages: 437-440, January 2014 (inproceedings)

Abstract
Three-dimensional (3D) fabrication techniques promise new device architectures and enable the integration of more components, but fabricating 3D nanostructures for device applications remains challenging. Recently, we have performed glancing angle deposition (GLAD) upon a nanoscale hexagonal seed array to create a variety of 3D nanoscale objects including multicomponent rods, helices, and zigzags [1]. Here, in an effort to generalize our technique, we present a step-by-step approach to grow 3D nanostructures on more complex nanoseed shapes and configurations than before. This approach allows us to create 3D nanostructures on nanoseeds regardless of seed sizes and shapes.

pf

DOI [BibTex]

2014


DOI [BibTex]


Active Microrheology of the Vitreous of the Eye applied to Nanorobot Propulsion
Active Microrheology of the Vitreous of the Eye applied to Nanorobot Propulsion

Qiu, T., Schamel, D., Mark, A. G., Fischer, P.

In 2014 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA), pages: 3801-3806, IEEE International Conference on Robotics and Automation ICRA, 2014, Best Automation Paper Award – Finalist. (inproceedings)

Abstract
Biomedical applications of micro or nanorobots require active movement through complex biological fluids. These are generally non-Newtonian (viscoelastic) fluids that are characterized by complicated networks of macromolecules that have size-dependent rheological properties. It has been suggested that an untethered microrobot could assist in retinal surgical procedures. To do this it must navigate the vitreous humor, a hydrated double network of collagen fibrils and high molecular-weight, polyanionic hyaluronan macromolecules. Here, we examine the characteristic size that potential robots must have to traverse vitreous relatively unhindered. We have constructed magnetic tweezers that provide a large gradient of up to 320 T/m to pull sub-micron paramagnetic beads through biological fluids. A novel two-step electrical discharge machining (EDM) approach is used to construct the tips of the magnetic tweezers with a resolution of 30 mu m and high aspect ratio of similar to 17:1 that restricts the magnetic field gradient to the plane of observation. We report measurements on porcine vitreous. In agreement with structural data and passive Brownian diffusion studies we find that the unhindered active propulsion through the eye calls for nanorobots with cross-sections of less than 500 nm.

Best Automation Paper Award – Finalist.

pf

[BibTex]

[BibTex]


no image
Increasing the sensor performance using Au modified high temperature superconducting YBa2Cu3O7-delta thin films

Katzer, C., Stahl, C., Michalowski, P., Treiber, S., Westernhausen, M., Schmidl, F., Seidel, P., Schütz, G., Albrecht, J.

In 507, IOP Pub., Genova, Italy, 2014 (inproceedings)

mms

DOI [BibTex]

DOI [BibTex]

2012


no image
Spin wave mediated magnetic vortex core reversal

Stoll, H.

In 8461, San Diego, California, USA, 2012 (inproceedings)

mms

DOI [BibTex]

2012


DOI [BibTex]

2007


no image

2004


no image
High-speed dynamics of magnetization processes in hard magnetic particles and thin platelets

Goll, D., Kronmüller, H.

In Proceedings of the 18th International Workshop on Rare-Earth Magnets and their Applications, pages: 465-469, Laboratoire de Cristallographie/Laboratoire Louis Neel, CNRS, Grenoble, 2004 (inproceedings)

mms

[BibTex]

2004


[BibTex]


no image
High-speed dynamics of magnetization processes in hard magnetic particles and thin platelets

Goll, D., Kronmüller, H.

In Proceedings of the 18th International Workshop on Rare-Earth Magnets and their Applications, pages: 465-469, Laboratoire de Cristallographie/Laboratoire Louis Neel, CNRS, Grenoble, 2004 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Modern nanocrystalline/nanostructured hard magnetic materials

Kronmüller, H., Goll, D.

In 272-276, pages: e319-e320, Rome [Italy], 2004 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Modern nanostructured high-temperature permanent magnets

Goll, D., Kronmüller, H., Stadelmaier, H. H.

In Proceedings of the 18th International Workshop on Rare-Earth Magnets and their Applications, pages: 578-583, Laboratoire de Cristallographie/Laboratoire Louis Néel, CNRS, Grenoble, 2004 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Imaging sub-ns spin dynamics in magnetic nanostructures with magnetic transmission X-ray microscopy

Fischer, P., Stoll, H., Puzic, A., Van Waeyenberge, B., Raabe, J., Haug, T., Denbeaux, G., Pearson, A., Höllinger, R., Back, C. H., Weiss, D., Schütz, G.

In Synchrotron Radiation Instrumentation, 705, pages: 1291-1294, AIP Conference Proceedings, American Institute of Physics, San Francisco, California (USA), 2004 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Modern nanostructured high-temperature permanent magnets

Goll, D., Kronmüller, H., Stadelmaier, H. H.

In Proceedings of the 18th International Workshop on Rare-Earth Magnets and their Applications, pages: 578-583, Laboratoire de Cristallographie/Laboratoire Louis Néel, CNRS, Grenoble, 2004 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Existence of transient temperature spike induced by SHI: evidence by ion beam analysis

Avasthi, D. K., Ghosh, S., Srivastava, S. K., Assmann, W.

In 219-220, pages: 206-214, Albuquerque, NM [USA], 2004 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Hard magnetic hollow nanospheres

Goll, D., Berkowitz, A. E., Bertram, H. N.

In Proceedings of the 18th International Workshop on Rare-Earth Magnets and their Applications, pages: 704-707, Laboratoire de Cristallographie/Laboratoire Louis Neel, CNRS, Grenoble, 2004 (inproceedings)

mms

[BibTex]

[BibTex]

2001


no image
Computational micromagnetism of magnetic structures and magnetization processes in thin plantelets and small particles

Kronmüller, H., Hertel, R.

In Magnetic Storage Sstems Beyond 2000, 41, pages: 345-362, Nato Science Series II: Mathematics, Physics and Chemistry, Kluwer Academic Publishers, Rhodos, Greece, 2001 (inproceedings)

mms

[BibTex]

2001


[BibTex]


no image
Hydrogen storage in mechanically treated single wall carbon nanotrubes

Haluska, M., Hulman, M., Hirscher, M., Becher, M., Roth, S., Stepanek, I., Bernier, P.

In Electronic Properties of Molecular Nanostructures: XV International Winterschool/Euroconference, 591, pages: 603-608, American Institute of Physics Conference Proceedings, AIP, Kirchberg [Austria], 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Isotopic mass and lattice constant of Si and Ge: X-Ray standing wave measurements

Zegenhagen, J., Kazimirov, A., Cao, L. X., Konuma, M., Sozontov, E., Plachke, D., Carstanjen, H. D., Bilger, G., Haller, E., Kohn, V., Cardona, M.

In Proceedings of the 25th Conference on the Physics of Semiconductors, 87, pages: 125-127, Springer proceedings in physics, Springer, Osaka, Japan, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Positron Annihilation Studies on Stable and Undercooled Metal Melts at the Stuttgart Pelletron

Stoll, H., Siegle, A., Major, J.

In Application of Accelerators in Research and Industry, 576, pages: 749-752, AIP Conference Proceedings, Denton, Texas, USA, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Submicrometer spatially resolved measurements of mechanical properties and correlation to microstructure and composition

Kunert, M., Baretzky, B., Baker, S. P., Mittemeijer, E. J.

In Fundamentals of Nanoindentation and Nanotribology II, 649, pages: Q3.2.1-Q3.2.6, Materials Research Society Symposium Proceedings, MRS, Boston, MA, USA, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
The six-jump diffusion cycles in B2-compounds

Drautz, R., Meyer, B., Fähnle, M.

In Proceedings of DIMAT 2000, the Fifth International Conference on Diffusion in Materials, pages: 417-422, Defect and Diffusion Forum, Scitec Publications Ltd., Paris, France, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Ionic nitriding of austenitic and ferritic steel with the aid of a high aperture hall current accelerator

Straumal, B. B., Vershinin, N. F., Friesel, M., Ishenko, S. A., Gust, W.

In Diffusion in Materials DIMAT2000, 194, pages: 1457-1462, Defect and Diffusion Forum, Trans Tech, Paris, France, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
First proof of slow trapping of positronium in polymers by an Age-Momentum-Correlation (AMOC) experiment

Dauwe, C., Balcaen, N., van Waeyenberge, B., van Petegem, S., Stoll, H.

In Positron Annihilation. Proceedings of the 12th International Conference on Positron Annihilation, 363/365, pages: 254-256, Materials Science Forum, Trans Tech Publications Ltd., München, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Positron-age-momentum correlation

Stoll, H., Bandzuch, P., Siegle, A.

In Positron Annihilation: Proceedings of the 12th International Conference on Positron Annihilation, 363-365, pages: 547-551, Materials Science Forum, Trans Tech Publications Ltd., München, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Nanocrystalline and nanostructured high-performance permanent magnets

Goll, D., Hadjipanayis, G. C., Kronmüller, H.

In Applications of Ferromagnetic and Optical Materials, Storage and Magnetoelectronics, 674, pages: U2.4.1-U2.4.12, Materials Research Society Symposium Proceedings, MRS, San Francisco, Calif., 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Ion beam analysis with monolayer depth resolution using the electrostatic spectrometer at the MPI Stuttgart

Plachke, D., Blohm, G., Fischer, T., Khellaf, A., Kruse, O., Stoll, H., Carstanjen, H. D.

In Proceedings of the 16th International Conference on Applications of Accelerators in Research and Industry, 576, pages: 458-462, American Institute of Physics Conference Proceedings, AIP, Denton, Texas, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
From the electronic structure to the macroscopiy behavior: A multi-scale analysis of plasticity in intermetallic compounds

Fähnle, M., Kohlhammer, S., Bester, G.

In Influences of Interface and Dislocation Behavior on Microstructure Evolution, 652, pages: Y4.5.1.-Y4.5.12, Materials Research Society Symposium Proceedings, MRS, Boston, Mass., USA, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Influence of the microstructure on the magnetic properties of giant-magnetostrictive TbDyFe films

Hirscher, M., Winzek, B., Fischer, S. F., Kronmüller, H.

In Smart Materials. Proceedings of the 1st Caesarium, pages: 23-37, Springer, Bonn, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Materials analysis with monolayer depth resolution using MeV ion beams

Carstanjen, H. D.

In 117, Las Vegas, USA, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Flux-line pinning in low-angle grain boundaries.

Albrecht, J., Leonhardt, S., Kronmüller, H.

In Proceedings 10th International Workshop on Critical Currents (IWCC 2001), pages: 41-43, Göttingen, Germany, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Measurement of the low-temperature self-diffusivity of lithium by elastic recoil detection analysis

Wieland, O., Carstanjen, H. D.

In Proceedings of DIMAT 2000, the Fifth International Conference on Diffusion in Materials, 194/199, pages: 35-41, Defect and Diffusion Forum, Scitec Publications Ltd., Paris, France, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
From the electronic structure to the macroscopic behaviour: a multi-scale analysis of plasticity in intermetallic compounds

Fähnle, M., Kohlhammer, S., Bester, G.

In Influences of Interface and Dislocation Behavior on Microstructure Evolution, 652, pages: Y.4.5.1-Y.4.5.12, Materials Research Society Symposium Proceedings, MRS, Boston, Mass., 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Enhancement of the critical current density of YBa2Cu3O7-8-films by substracte irradiation

Leonhardt, S., Albrecht, J., Warthmann, R., Kronmüller, H.

In High-Tc Superconductors and Related Applications: Materials Science, Fundamental Properties, and Some Future Electronic Applications. Proceedings of the NATO Advanced Study Institute, 86, pages: 529-534, NATO Science Series 3. High Technology, Kluwer Academic Publishers, Albena, Bulgaria, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
AMOC studies of positronium in fine MgO powder

van Waeyenberge, B., Dauwe, C., Stoll, H.

In Positron Annihilation. Proceedings of the 12th International Conference on Positron Annihilation, 363/365, pages: 401-403, Materials Science Forum, Trans Tech Publications Ltd., München, 2001 (inproceedings)

mms

[BibTex]

[BibTex]


no image
Atomic defects and electronic structure of B2-FeAl, CoAl and NiAl

Fähnle, M., Meyer, B., Bester, G., Majer, J., Börnsen, N.

In Proceedings of DIMAT 2000, the Fifth International Conference on Diffusion in Materials, 194/199, pages: 279-285, Defect and Diffusion Forum, Scitec Publications Ltd., Paris, France, 2001 (inproceedings)

mms

[BibTex]

[BibTex]