Header logo is


2011


Thumb xl iccv2011homepageimage notext small
Home 3D body scans from noisy image and range data

Weiss, A., Hirshberg, D., Black, M.

In Int. Conf. on Computer Vision (ICCV), pages: 1951-1958, IEEE, Barcelona, November 2011 (inproceedings)

Abstract
The 3D shape of the human body is useful for applications in fitness, games and apparel. Accurate body scanners, however, are expensive, limiting the availability of 3D body models. We present a method for human shape reconstruction from noisy monocular image and range data using a single inexpensive commodity sensor. The approach combines low-resolution image silhouettes with coarse range data to estimate a parametric model of the body. Accurate 3D shape estimates are obtained by combining multiple monocular views of a person moving in front of the sensor. To cope with varying body pose, we use a SCAPE body model which factors 3D body shape and pose variations. This enables the estimation of a single consistent shape while allowing pose to vary. Additionally, we describe a novel method to minimize the distance between the projected 3D body contour and the image silhouette that uses analytic derivatives of the objective function. We propose a simple method to estimate standard body measurements from the recovered SCAPE model and show that the accuracy of our method is competitive with commercial body scanning systems costing orders of magnitude more.

ps

pdf YouTube poster Project Page Project Page [BibTex]

2011


pdf YouTube poster Project Page Project Page [BibTex]


Thumb xl lugano11small
Evaluating the Automated Alignment of 3D Human Body Scans

Hirshberg, D. A., Loper, M., Rachlin, E., Tsoli, A., Weiss, A., Corner, B., Black, M. J.

In 2nd International Conference on 3D Body Scanning Technologies, pages: 76-86, (Editors: D’Apuzzo, Nicola), Hometrica Consulting, Lugano, Switzerland, October 2011 (inproceedings)

Abstract
The statistical analysis of large corpora of human body scans requires that these scans be in alignment, either for a small set of key landmarks or densely for all the vertices in the scan. Existing techniques tend to rely on hand-placed landmarks or algorithms that extract landmarks from scans. The former is time consuming and subjective while the latter is error prone. Here we show that a model-based approach can align meshes automatically, producing alignment accuracy similar to that of previous methods that rely on many landmarks. Specifically, we align a low-resolution, artist-created template body mesh to many high-resolution laser scans. Our alignment procedure employs a robust iterative closest point method with a regularization that promotes smooth and locally rigid deformation of the template mesh. We evaluate our approach on 50 female body models from the CAESAR dataset that vary significantly in body shape. To make the method fully automatic, we define simple feature detectors for the head and ankles, which provide initial landmark locations. We find that, if body poses are fairly similar, as in CAESAR, the fully automated method provides dense alignments that enable statistical analysis and anthropometric measurement.

ps

pdf slides DOI Project Page [BibTex]

pdf slides DOI Project Page [BibTex]


Thumb xl sigalijcv11
Loose-limbed People: Estimating 3D Human Pose and Motion Using Non-parametric Belief Propagation

Sigal, L., Isard, M., Haussecker, H., Black, M. J.

International Journal of Computer Vision, 98(1):15-48, Springer Netherlands, May 2011 (article)

Abstract
We formulate the problem of 3D human pose estimation and tracking as one of inference in a graphical model. Unlike traditional kinematic tree representations, our model of the body is a collection of loosely-connected body-parts. In particular, we model the body using an undirected graphical model in which nodes correspond to parts and edges to kinematic, penetration, and temporal constraints imposed by the joints and the world. These constraints are encoded using pair-wise statistical distributions, that are learned from motion-capture training data. Human pose and motion estimation is formulated as inference in this graphical model and is solved using Particle Message Passing (PaMPas). PaMPas is a form of non-parametric belief propagation that uses a variation of particle filtering that can be applied over a general graphical model with loops. The loose-limbed model and decentralized graph structure allow us to incorporate information from "bottom-up" visual cues, such as limb and head detectors, into the inference process. These detectors enable automatic initialization and aid recovery from transient tracking failures. We illustrate the method by automatically tracking people in multi-view imagery using a set of calibrated cameras and present quantitative evaluation using the HumanEva dataset.

ps

pdf publisher's site link (url) Project Page Project Page [BibTex]

pdf publisher's site link (url) Project Page Project Page [BibTex]


Thumb xl pointclickimagewide
Point-and-Click Cursor Control With an Intracortical Neural Interface System by Humans With Tetraplegia

Kim, S., Simeral, J. D., Hochberg, L. R., Donoghue, J. P., Friehs, G. M., Black, M. J.

IEEE Transactions on Neural Systems and Rehabilitation Engineering, 19(2):193-203, April 2011 (article)

Abstract
We present a point-and-click intracortical neural interface system (NIS) that enables humans with tetraplegia to volitionally move a 2D computer cursor in any desired direction on a computer screen, hold it still and click on the area of interest. This direct brain-computer interface extracts both discrete (click) and continuous (cursor velocity) signals from a single small population of neurons in human motor cortex. A key component of this system is a multi-state probabilistic decoding algorithm that simultaneously decodes neural spiking activity and outputs either a click signal or the velocity of the cursor. The algorithm combines a linear classifier, which determines whether the user is intending to click or move the cursor, with a Kalman filter that translates the neural population activity into cursor velocity. We present a paradigm for training the multi-state decoding algorithm using neural activity observed during imagined actions. Two human participants with tetraplegia (paralysis of the four limbs) performed a closed-loop radial target acquisition task using the point-and-click NIS over multiple sessions. We quantified point-and-click performance using various human-computer interaction measurements for pointing devices. We found that participants were able to control the cursor motion accurately and click on specified targets with a small error rate (< 3% in one participant). This study suggests that signals from a small ensemble of motor cortical neurons (~40) can be used for natural point-and-click 2D cursor control of a personal computer.

ps

pdf publishers's site pub med link (url) Project Page [BibTex]

pdf publishers's site pub med link (url) Project Page [BibTex]


Thumb xl middleburyimagesmall
A Database and Evaluation Methodology for Optical Flow

Baker, S., Scharstein, D., Lewis, J. P., Roth, S., Black, M. J., Szeliski, R.

International Journal of Computer Vision, 92(1):1-31, March 2011 (article)

Abstract
The quantitative evaluation of optical flow algorithms by Barron et al. (1994) led to significant advances in performance. The challenges for optical flow algorithms today go beyond the datasets and evaluation methods proposed in that paper. Instead, they center on problems associated with complex natural scenes, including nonrigid motion, real sensor noise, and motion discontinuities. We propose a new set of benchmarks and evaluation methods for the next generation of optical flow algorithms. To that end, we contribute four types of data to test different aspects of optical flow algorithms: (1) sequences with nonrigid motion where the ground-truth flow is determined by tracking hidden fluorescent texture, (2) realistic synthetic sequences, (3) high frame-rate video used to study interpolation error, and (4) modified stereo sequences of static scenes. In addition to the average angular error used by Barron et al., we compute the absolute flow endpoint error, measures for frame interpolation error, improved statistics, and results at motion discontinuities and in textureless regions. In October 2007, we published the performance of several well-known methods on a preliminary version of our data to establish the current state of the art. We also made the data freely available on the web at http://vision.middlebury.edu/flow/ . Subsequently a number of researchers have uploaded their results to our website and published papers using the data. A significant improvement in performance has already been achieved. In this paper we analyze the results obtained to date and draw a large number of conclusions from them.

ps

pdf pdf from publisher Middlebury Flow Evaluation Website [BibTex]

pdf pdf from publisher Middlebury Flow Evaluation Website [BibTex]


Thumb xl problem
Recovering Intrinsic Images with a Global Sparsity Prior on Reflectance

Gehler, P., Rother, C., Kiefel, M., Zhang, L., Schölkopf, B.

In Advances in Neural Information Processing Systems 24, pages: 765-773, (Editors: Shawe-Taylor, John and Zemel, Richard S. and Bartlett, Peter L. and Pereira, Fernando C. N. and Weinberger, Kilian Q.), Curran Associates, Inc., Red Hook, NY, USA, Twenty-Fifth Annual Conference on Neural Information Processing Systems (NIPS), 2011 (inproceedings)

Abstract
We address the challenging task of decoupling material properties from lighting properties given a single image. In the last two decades virtually all works have concentrated on exploiting edge information to address this problem. We take a different route by introducing a new prior on reflectance, that models reflectance values as being drawn from a sparse set of basis colors. This results in a Random Field model with global, latent variables (basis colors) and pixel-accurate output reflectance values. We show that without edge information high-quality results can be achieved, that are on par with methods exploiting this source of information. Finally, we are able to improve on state-of-the-art results by integrating edge information into our model. We believe that our new approach is an excellent starting point for future developments in this field.

ei ps

website + code pdf poster Project Page Project Page [BibTex]

website + code pdf poster Project Page Project Page [BibTex]


Thumb xl fosterembs2011
Combining wireless neural recording and video capture for the analysis of natural gait

Foster, J., Freifeld, O., Nuyujukian, P., Ryu, S., Black, M. J., Shenoy, K.

In Proc. 5th Int. IEEE EMBS Conf. on Neural Engineering, pages: 613-616, IEEE, 2011 (inproceedings)

ps

pdf Project Page [BibTex]

pdf Project Page [BibTex]


no image
The Oxidation of Fe(111)

Davies, R., Edwards, D., Gräfe, J., Gilbert, L., Davies, P., Hutchings, G., Bowker, M.

Surface Science, 605(17-18):1754-1762, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
High-resolution x-ray absorption spectroscopy of BaTiO_3: Experiment and first-principles calculations

Chassé, A., Borek, S., Schindler, K., Trautmann, M., Huth, M., Steudel, F., Makhova, L., Gräfe, J., Denecke, R.

Physical Review B, 84, pages: 195135, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


Thumb xl 1000dayimagesmall
Neural control of cursor trajectory and click by a human with tetraplegia 1000 days after implant of an intracortical microelectrode array

(J. Neural Engineering Highlights of 2011 Collection. JNE top 10 cited papers of 2010-2011.)

Simeral, J. D., Kim, S., Black, M. J., Donoghue, J. P., Hochberg, L. R.

J. of Neural Engineering, 8(2):025027, 2011 (article)

Abstract
The ongoing pilot clinical trial of the BrainGate neural interface system aims in part to assess the feasibility of using neural activity obtained from a small-scale, chronically implanted, intracortical microelectrode array to provide control signals for a neural prosthesis system. Critical questions include how long implanted microelectrodes will record useful neural signals, how reliably those signals can be acquired and decoded, and how effectively they can be used to control various assistive technologies such as computers and robotic assistive devices, or to enable functional electrical stimulation of paralyzed muscles. Here we examined these questions by assessing neural cursor control and BrainGate system characteristics on five consecutive days 1000 days after implant of a 4 × 4 mm array of 100 microelectrodes in the motor cortex of a human with longstanding tetraplegia subsequent to a brainstem stroke. On each of five prospectively-selected days we performed time-amplitude sorting of neuronal spiking activity, trained a population-based Kalman velocity decoding filter combined with a linear discriminant click state classifier, and then assessed closed-loop point-and-click cursor control. The participant performed both an eight-target center-out task and a random target Fitts metric task which was adapted from a human-computer interaction ISO standard used to quantify performance of computer input devices. The neural interface system was further characterized by daily measurement of electrode impedances, unit waveforms and local field potentials. Across the five days, spiking signals were obtained from 41 of 96 electrodes and were successfully decoded to provide neural cursor point-and-click control with a mean task performance of 91.3% ± 0.1% (mean ± s.d.) correct target acquisition. Results across five consecutive days demonstrate that a neural interface system based on an intracortical microelectrode array can provide repeatable, accurate point-and-click control of a computer interface to an individual with tetraplegia 1000 days after implantation of this sensor.

ps

pdf pdf from publisher link (url) Project Page [BibTex]


no image
Ferromagnetism of ZnO influenced by physical and chemical treatment

Chen, Y.

Universität Stuttgart, Stuttgart, 2011 (mastersthesis)

mms

[BibTex]

[BibTex]


no image
Herstellung und Charakterisierung von ultradünnen, funktionellen CoFeB Filmen

Streckenbach, F.

Hochschule Esslingen / Hochschule Aalen, Esslingen / Aalen, 2011 (mastersthesis)

mms

[BibTex]

[BibTex]


no image
Hydrogen adsorption on metal-organic frameworks

Streppel, B.

Universität Stuttgart, Stuttgart, 2011 (phdthesis)

mms

link (url) [BibTex]

link (url) [BibTex]


no image
Electron theory of fast and ultrafast dissipative magnetization dynamics

Fähnle, M., Illg, C.

{Journal of Physics: Condensed Matter}, 23, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Large-area hard magnetic L10-FePt nanopatterns by nanoimprint lithography

Bublat, T., Goll, D.

{Nanotechnology}, 22(31), 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Hydrogen storage by cryoadsorption in ultrahigh-porosity metal-organic frameworks

Hirscher, M.

{Angewandte Chemie International Edition}, 50(3):581-582, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Amorphous grain boundary layers in the ferromagnetic nanograined ZnO films

Straumal, B. B., Mazilkin, A. A., Protasova, S. G., Myatiev, A. A., Straumal, P. B., Goering, E., Baretzky, B.

In 520, pages: 1192-1194, Hersonissos, Greece, 2011 (inproceedings)

mms

DOI [BibTex]

DOI [BibTex]


no image
Multilayer Fresnel zone plate for soft X-ray microscopy resolves sub-39 nm structures

Mayer, M., Grévent, C., Szeghalmi, A., Knez, M., Weigand, M., Rehbein, S., Schneider, G., Baretzky, B., Schütz, G.

{Ultramicroscopy}, 111, pages: 1706-1711, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Generalized Gilbert equation including inertial damping: derivation from an extended breathing Fermi surface model

Fähnle, M., Steiauf, D., Illg, C.

{Physical Review B}, 84, 2011 (article)

mms

DOI [BibTex]


no image
Hydrogen physisorption in high SSA microporous materials - A comparison between AX-21\textunderscore33 and MOF-177 at cryogenic conditions

Schlichtenmayer, M., Streppel, B., Hirscher, M.

{International Journal of Hydrogen Energy}, 36, pages: 586-591, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Inversed solid-phase grain boundary wetting in the Al-Zn system

Protasova, S. G., Kogtenkova, O. A., Straumal, B. B., Zieba, P., Baretzky, B.

In 46, pages: 4349-4353, Mie, Japan, 2011 (inproceedings)

mms

DOI [BibTex]

DOI [BibTex]


no image
Magnetic vortex core reversal by excitation of spin waves

Kammerer, M., Weigand, M., Curcic, M., Noske, M., Sproll, M., Vansteenkiste, A., Van Waeyenberge, B., Stoll, H., Woltersdorf, G., Back, C. H., Schütz, G.

{Nature Communications}, 2, pages: 279-284, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Toward simple control for complex, autonomous robotic applications: combining discrete and rhythmic motor primitives

Degallier, S., Righetti, L., Gay, S., Ijspeert, A.

Autonomous Robots, 31(2-3):155-181, October 2011 (article)

Abstract
Vertebrates are able to quickly adapt to new environments in a very robust, seemingly effortless way. To explain both this adaptivity and robustness, a very promising perspective in neurosciences is the modular approach to movement generation: Movements results from combinations of a finite set of stable motor primitives organized at the spinal level. In this article we apply this concept of modular generation of movements to the control of robots with a high number of degrees of freedom, an issue that is challenging notably because planning complex, multidimensional trajectories in time-varying environments is a laborious and costly process. We thus propose to decrease the complexity of the planning phase through the use of a combination of discrete and rhythmic motor primitives, leading to the decoupling of the planning phase (i.e. the choice of behavior) and the actual trajectory generation. Such implementation eases the control of, and the switch between, different behaviors by reducing the dimensionality of the high-level commands. Moreover, since the motor primitives are generated by dynamical systems, the trajectories can be smoothly modulated, either by high-level commands to change the current behavior or by sensory feedback information to adapt to environmental constraints. In order to show the generality of our approach, we apply the framework to interactive drumming and infant crawling in a humanoid robot. These experiments illustrate the simplicity of the control architecture in terms of planning, the integration of different types of feedback (vision and contact) and the capacity of autonomously switching between different behaviors (crawling and simple reaching).

mg

link (url) DOI [BibTex]

link (url) DOI [BibTex]


no image
Learning Force Control Policies for Compliant Manipulation

Kalakrishnan, M., Righetti, L., Pastor, P., Schaal, S.

In 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems, pages: 4639-4644, IEEE, San Francisco, USA, sep 2011 (inproceedings)

Abstract
Developing robots capable of fine manipulation skills is of major importance in order to build truly assistive robots. These robots need to be compliant in their actuation and control in order to operate safely in human environments. Manipulation tasks imply complex contact interactions with the external world, and involve reasoning about the forces and torques to be applied. Planning under contact conditions is usually impractical due to computational complexity, and a lack of precise dynamics models of the environment. We present an approach to acquiring manipulation skills on compliant robots through reinforcement learning. The initial position control policy for manipulation is initialized through kinesthetic demonstration. We augment this policy with a force/torque profile to be controlled in combination with the position trajectories. We use the Policy Improvement with Path Integrals (PI2) algorithm to learn these force/torque profiles by optimizing a cost function that measures task success. We demonstrate our approach on the Barrett WAM robot arm equipped with a 6-DOF force/torque sensor on two different manipulation tasks: opening a door with a lever door handle, and picking up a pen off the table. We show that the learnt force control policies allow successful, robust execution of the tasks.

am mg

link (url) DOI [BibTex]

link (url) DOI [BibTex]


no image
Control of legged robots with optimal distribution of contact forces

Righetti, L., Buchli, J., Mistry, M., Schaal, S.

In 2011 11th IEEE-RAS International Conference on Humanoid Robots, pages: 318-324, IEEE, Bled, Slovenia, 2011 (inproceedings)

Abstract
The development of agile and safe humanoid robots require controllers that guarantee both high tracking performance and compliance with the environment. More specifically, the control of contact interaction is of crucial importance for robots that will actively interact with their environment. Model-based controllers such as inverse dynamics or operational space control are very appealing as they offer both high tracking performance and compliance. However, while widely used for fully actuated systems such as manipulators, they are not yet standard controllers for legged robots such as humanoids. Indeed such robots are fundamentally different from manipulators as they are underactuated due to their floating-base and subject to switching contact constraints. In this paper we present an inverse dynamics controller for legged robots that use torque redundancy to create an optimal distribution of contact constraints. The resulting controller is able to minimize, given a desired motion, any quadratic cost of the contact constraints at each instant of time. In particular we show how this can be used to minimize tangential forces during locomotion, therefore significantly improving the locomotion of legged robots on difficult terrains. In addition to the theoretical result, we present simulations of a humanoid and a quadruped robot, as well as experiments on a real quadruped robot that demonstrate the advantages of the controller.

am mg

link (url) DOI [BibTex]

link (url) DOI [BibTex]


no image
Learning Motion Primitive Goals for Robust Manipulation

Stulp, F., Theodorou, E., Kalakrishnan, M., Pastor, P., Righetti, L., Schaal, S.

In IEEE/RSJ International Conference on Intelligent Robots and Systems, pages: 325-331, IEEE, San Francisco, USA, sep 2011 (inproceedings)

Abstract
Applying model-free reinforcement learning to manipulation remains challenging for several reasons. First, manipulation involves physical contact, which causes discontinuous cost functions. Second, in manipulation, the end-point of the movement must be chosen carefully, as it represents a grasp which must be adapted to the pose and shape of the object. Finally, there is uncertainty in the object pose, and even the most carefully planned movement may fail if the object is not at the expected position. To address these challenges we 1) present a simplified, computationally more efficient version of our model-free reinforcement learning algorithm PI2; 2) extend PI2 so that it simultaneously learns shape parameters and goal parameters of motion primitives; 3) use shape and goal learning to acquire motion primitives that are robust to object pose uncertainty. We evaluate these contributions on a manipulation platform consisting of a 7-DOF arm with a 4-DOF hand.

am mg

link (url) DOI [BibTex]

link (url) DOI [BibTex]


no image
Inverse Dynamics Control of Floating-Base Robots with External Constraints: a Unified View

Righetti, L., Buchli, J., Mistry, M., Schaal, S.

In 2011 IEEE International Conference on Robotics and Automation, pages: 1085-1090, IEEE, Shanghai, China, 2011 (inproceedings)

Abstract
Inverse dynamics controllers and operational space controllers have proved to be very efficient for compliant control of fully actuated robots such as fixed base manipulators. However legged robots such as humanoids are inherently different as they are underactuated and subject to switching external contact constraints. Recently several methods have been proposed to create inverse dynamics controllers and operational space controllers for these robots. In an attempt to compare these different approaches, we develop a general framework for inverse dynamics control and show that these methods lead to very similar controllers. We are then able to greatly simplify recent whole-body controllers based on operational space approaches using kinematic projections, bringing them closer to efficient practical implementations. We also generalize these controllers such that they can be optimal under an arbitrary quadratic cost in the commands.

am mg

link (url) DOI [BibTex]

link (url) DOI [BibTex]


no image
Piezo driven strain effects on magneto-crystalline anisotropy

Badr, E.

Universität Stuttgart, Stuttgart, 2011 (mastersthesis)

mms

[BibTex]

[BibTex]


no image
Magnetooptische Untersuchungen an granularen und beschichteten MgB2 Filmen

Stahl, C.

Universität Stuttgart, Stuttgart, 2011 (mastersthesis)

mms

[BibTex]

[BibTex]


no image
Mikromagnetismus der Wechselwirkung von Spinwellen mit Domänenwänden in Ferromagneten

Macke, S.

Universität Stuttgart, Stuttgart, 2011 (phdthesis)

mms

[BibTex]

[BibTex]


no image
Magnetism studied with circularly polarized X-rays

Schütz, G., Goering, E., Stoll, H.

{International Journal of Materials Research}, 102(7):773-783, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Coupled vortex oscillations in spatially separated permalloy squares

Vogel, A., Kamionka, T., Martens, M., Drews, A., Chou, K., Tyliszczak, T., Stoll, H., Van Waeyenberge, B., Meier, G.

{Physical Review Letters}, 106, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Contruction of basis functions with crystal symmetry for the spin-cluster expansion of the magnetic energy on the atomic scale

Dietermann, F., Singer, R., Fähnle, M.

{Journal of Mathematical Physics}, 52, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Magnetic patterning perpendicular anisotropy FePd alloy films by masked ion irradiation

Merkel, D. G., Bottyán, L., Tanczikó, F., Zolnai, Z., Nagy, N., Vértesy, G., Waizinger, J., Bommer, L.

{Journal of Applied Physics}, 109(12), 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Characterization of hydrogen/deuterium adsorption sites in nanoporous Cu-BTC by low-temperature thermal-desorption mass spectroscopy

Krkljus, I., Hirscher, M.

{Microporous and Mesoporous Materials}, 142, pages: 725-729, 2011 (article)

mms

DOI [BibTex]


no image
Stability of the current-carrying state in nonhomogeneous MgB2 films

Treiber, S., Stahl, C., Schütz, G., Albrecht, J.

{Physical Review B}, 84, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
First measurement of the heat effect of the grain boundary wetting phase transition

Straumal, B. B., Kogtenkova, O. A., Protasova, S. G., Zieba, P., Czeppe, T., Baretzky, B., Valiev, R. Z.

In 46, pages: 4243, Mie, Japan, 2011 (inproceedings)

mms

DOI [BibTex]

DOI [BibTex]


no image
Orbital reflectometry of oxide heterostructures

Benckiser, E., Haverkort, M. W., Brück, S., Goering, E., Macke, S., Fraño, A., Yang, X., Andersen, O. K., Cristiani, G., Habermeier, H., Boris, A. V., Zegkinoglou, I., Wochner, P., Kim, H., Hinkov, V., Keimer, B.

{Nature Materials}, 10(3):189-193, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Potential explanation of charge response of magnetization in nanoporous systems

Subkow, S., Fähnle, M.

{Physical Review B}, 84, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


Thumb xl dagm2011imagesmall
Shape and pose-invariant correspondences using probabilistic geodesic surface embedding

Tsoli, A., Black, M. J.

In 33rd Annual Symposium of the German Association for Pattern Recognition (DAGM), 6835, pages: 256-265, Lecture Notes in Computer Science, (Editors: Mester, Rudolf and Felsberg, Michael), Springer, 2011 (inproceedings)

Abstract
Correspondence between non-rigid deformable 3D objects provides a foundation for object matching and retrieval, recognition, and 3D alignment. Establishing 3D correspondence is challenging when there are non-rigid deformations or articulations between instances of a class. We present a method for automatically finding such correspondences that deals with significant variations in pose, shape and resolution between pairs of objects.We represent objects as triangular meshes and consider normalized geodesic distances as representing their intrinsic characteristics. Geodesic distances are invariant to pose variations and nearly invariant to shape variations when properly normalized. The proposed method registers two objects by optimizing a joint probabilistic model over a subset of vertex pairs between the objects. The model enforces preservation of geodesic distances between corresponding vertex pairs and inference is performed using loopy belief propagation in a hierarchical scheme. Additionally our method prefers solutions in which local shape information is consistent at matching vertices. We quantitatively evaluate our method and show that is is more accurate than a state of the art method.

ps

pdf talk Project Page [BibTex]

pdf talk Project Page [BibTex]


no image
Herstellung und Qualifizierung gesputterter Magnesiumdiboridschichten

Breyer, F.

Hochschule Aalen, Aalen, 2011 (mastersthesis)

mms

[BibTex]

[BibTex]


no image
Large hidden orbital moments in magnetite

Goering, E.

{Physica Status Solidi B}, 248(10):2345-2351, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Cr magnetization reversal at the CrO2/RuO2 interface: Origin of the reduced GMR effect

Zafar, K., Audehm, P., Schütz, G., Goering, E., Pathak, M., Chetry, K. B., LeClair, P. R., Gupta, A.

{Physical Review B}, 84, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Magnetocaloric effect, magnetic domain structure and spin-reorientation transitios in HoCo5 single crystals

Skokov, K. P., Pastushenkov, Y. G., Koshkid\textquotesingleko, Y. S., Schütz, G., Goll, D., Ivanova, T. I., Nikitin, S. A., Semenova, E. M., Petrenko, A. V.

{Journal of Magnetism and Magnetic Materials}, 323(5):447-450, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Elucidating gating effects for hydrogen sorption in MFU-4-type triazolate-based metal-organic frameworks featuring different pore sizes

Denysenko, D., Grzywa, M., Tonigold, M., Streppel, B., Krkljus, I., Hirscher, M., Mugnaioli, E., Kolb, U., Hanss, J., Volkmer, D.

{Chemistry - A European Journal}, 17(6):1837-1848, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
BET specific surface area and pore structure of MOFs determined by hydrogen adsorption at 20 K

Streppel, B., Hirscher, M.

{Physical Chemistry Chemical Physics}, 13(8):3220-3222, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
High contrast magnetic and nonmagnetic sample current microscopy for bulk and transparent samples using soft X-rays

Nolle, D., Weigand, M., Schütz, G., Goering, E.

{Microscopy and Microanalysis}, 17, pages: 834-842, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Magnetic vortex core reversal by rotating magnetic fields generated on micrometer length scales

Curcic, M., Stoll, H., Weigand, M., Sackmann, V., Jüllig, P., Kammerer, M., Noske, M., Sproll, M., Van Waeyenberge, B., Vansteenkiste, A., Woltersdorf, G., Tyliszczak, T., Schütz, G.

{Physica Status Solidi B}, 248(10):2317-2322, 2011 (article)

mms

DOI [BibTex]

DOI [BibTex]